My Experience
at Siimed, Inc.
January 2012 — Present. California, USA.
Siemens MRI
A non working MRI is full of expenses, not counting the little extra details you are not able to make any studies on, so it is a double loss. We are here to help minimize the down time of your MRI room.
Siemens MRI Preventive and Corrective Maintenance.
Inspection:
When we are going to purchase a Siemens MRI room for us or for a costumer, we are extra careful in this step since it is the most important. It needs to go through a check list with a rigorous pre-purchase inspection. A good low price for a problematic Siemens MRI is not worth it at the end of the project. Choosing a good working MRI will always be cheaper than trying to buy a low price but problematic or stored MRI.De-installation:
We carefully plan the de-install details such as best route to rigging out and best day to make it happen. All the work around a de-install we will take care of it. Our experienced engineers carefully remove the system from its old site and prepare it for its new life elsewhere.Remanufacturing/Refurbishing:
Before the Installing starts we take care of all the MUST DO´S on our check list at the time of de-installation. When the time comes we will have all the Siemens MRI room ready to work and meet manufacturer´s specifications.Logistics:
The MRI is carefully packaged and shipped to its destination, installed and tested.Planning:
This is another important key step to have your new refurbished Siemens MRI room working in perfect condition for a long time. Making a correct pre-install and planning the new site is almost as important as the MRI itself. A bad project cost money not once but many times in the future trying to repair what was done bad.RF Shielding/Magnetic Shielding:
We could do the RF Shielding or we could inspect, test, and ensure proper Magnetic and RF shielding to the existing one.Rigging in:
Proper rigging of the magnet is performed by an experienced rigging professional.Installation:
We will do all the installation of your Siemens MRI room and run all the manufacturer diagnostics to ensure the MRI is in optimum working condition as a final test. There after in 2 weeks we do a follow-up to check all is running normally.Warranty:
All the Medical Equipment that we take care of is fully warranted and covered by Siimed, Inc.Extended Service Coverage:
Siimed Inc. offers significant savings over the manufacturer on service contracts, parts and accessories. With pre owned parts when possible, only labor or full contracts. Siemens CT Scanners
We can perform a Regular Siemens CT Periodic Maintenance protocol on your Scanner, as well as all the corrective services to keep your Room Up and Running.
CT Scanner Maintenance, Sales and Re-Installs
Inspection:
When we are going to purchase a Siemens CT scanner room for us or for a costumer, we are extra careful in this step since it is the most important. It needs to go through a check list with a rigorous pre-purchase inspection. A good low price for a problematic Siemens CT scanner is not worth it at the end of the project. Choosing a good working CT will always be cheaper than trying to buy a low price but problematic or stored CT.
De-installation:
We carefully plan the de-install details such as best route to rigging out and best day to make it happen. All the work around a de-install we will take care of it. Our experienced engineers carefully remove the system from its old site and prepare it for its new life elsewhere.
Remanufacturing/Refurbishing:
Before the Installing starts we take care of all the MUST DO´S on our check list at the time of de-installation. When the time comes we will have all the Siemens CT scanner room ready to work and meet manufacturer´s specifications.
Logistics:
The CT scanner is carefully packaged and shipped to its destination, installed and tested.
Planning:
This is another important key step to have your new refurbished Siemens Tomography room working in perfect condition for a long time. Making a correct pre-install and planning the new site is almost as important as the CT itself. A bad project cost money not once but many times in the future trying to repair what was done bad.
Rigging in:
Proper rigging of the Gantry is performed by an experienced rigging professional.
Installation:
We will do all the installation of your Siemens Tomography room and run all the manufacturer diagnostics to ensure the CT is in optimum working condition as a final test. There after in 2 weeks we do a follow-up to check all is running normally.
Applications and Training:
Application specialist train the facilities technicians on their new Siemens Equipment.
Warranty:
All the Medical Equipment that we take care of is fully warranted and covered by Siimed, Inc.
Extended Service Coverage:
Siimed Inc. offers significant savings over the manufacturer on service contracts, parts and accessories. With pre owned parts when possible, only labor or full contracts.
Accreditation:
Technicians have the Computed Tomography accredited by the ACR.
Financing:
We could help with a Financing plan for your new facility, or just give you a better price for a full payment.
Siemens X Ray Equipment